• RazoRock Stainless Steel Raised Inkwell Razor Stand

  • $12.99

  • Add to Wishlist

  • RazoRock Stainless Steel Raised Inkwell Razor Stand - NEW DESIGN for 2021

    Razor handles come in different diameters; this can be frustrating for shavers that own many different safety razors and who are looking for stands that can accommodate almost all of them. We sell razors with 12 mm handles, 13 mm handle and also handles with 14 mm butt ends. This stainless steel inkwell stand that can accommodate all of them! The RazoRock Stainless Steel Inkwell Razor Stand is fully CNC milled from 316L stainless steel. It is very compact but has excellent weight, a great way to display your razors in a cabinet or on the bathroom countertop. Keep in mind the handle slot is drilled to just over 14 mm in diameter so if you are inserting a handle that is less than 14 mm it will sit canted to one side or the other like a toothbrush stand.

    Other brands sell similar stands sell for $25 - $50 and in typical RazoRock style, we have used the power of purchasing in high volume to reduce the cost and pass along the HEAVILY discounted price to our customers. If you love your RazoRock fully milled stainless steel handles, this new design raised inkwell stand is the perfect companion. 

    Specs: The stand will accommodate most safety razor handles up to 14 mm in diameter.

    Weight: 3.9 oz (110 g)

    Finish: Mirror Polished

    Material: 316L Stainless Steel

    Note: Photo with Handle is for DISPLAY PURPOSES ONLY - HANDLE NOT INCLUDED!

    RazoRock

    Customer Reviews

    Based on 6 reviews
    67%
    (4)
    33%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    C
    Cale
    Perfect for newer Barber Pole Handles

    Michael's review in Feb 2021 observed that RR's Barber Pole handles do not fit in this inkwell. That was true back then, but not anymore. I have 3 of the Barber Pole handles -- one purchased several years ago and two that i bought in the last few months. My old Barber Pole is too large to use with this stand, but the new handles fit perfectly. The stand also works well with my Super Knurl handles, both new and old. And even though the Super Knurls don't fit as snugly as the Barber Poles, they stand up nice and straight even when fitted with an SE head -- no leaning whatsoever. Of course, that's also true for the Barber Pole handles. This is a nicely weighted, attractive stand. And it's a bargain to boot. Five Stars!

    J
    Joshua

    It's a simple stand that does what it should. Couldn't be happier.

    T
    Tony H
    Great stand fits most of my razors

    Fits my Razorock HD, UFO, and Super Knurl handles. Fits my Feather AS-D2 (there’s a bit of lean) as well as my Karve brass Overlander (with a bit of lean) and my Parker 24c. It fits my ‘59 Gillette Fatboy perfectly, like it was made for it. The only razor I own that won’t fit in it is my Merkur 34G (the gold plated version of the 34C).

    I love the drainage hole in the bottom and will now put the handle of a 3-piece razor in it upside down to drain the water out of the handle after shaving. I’ve always worried about trapping water in the handle and corroding the inside but I’m sure if I leave a handle upside down in this stand for awhile, that will dry it out.

    J
    John
    Mostly great

    The stand had a nice heft to it, and fit the razorock UFO handle well. The bottom of the stand, however, is unfinished, and mine had a thin crack on the bottom. I was told by customer service that the bottom is unfinished on all stands to lower costs, so this should be expected. Overall, good value.

    S
    Sean
    The best stand ever I have had

    Great finishing, proper weight and positioning.

    12

    Write a review

You may also like

YOU ALREADY VIEWED

Customer Reviews

Based on 6 reviews
67%
(4)
33%
(2)
0%
(0)
0%
(0)
0%
(0)
C
Cale
Perfect for newer Barber Pole Handles

Michael's review in Feb 2021 observed that RR's Barber Pole handles do not fit in this inkwell. That was true back then, but not anymore. I have 3 of the Barber Pole handles -- one purchased several years ago and two that i bought in the last few months. My old Barber Pole is too large to use with this stand, but the new handles fit perfectly. The stand also works well with my Super Knurl handles, both new and old. And even though the Super Knurls don't fit as snugly as the Barber Poles, they stand up nice and straight even when fitted with an SE head -- no leaning whatsoever. Of course, that's also true for the Barber Pole handles. This is a nicely weighted, attractive stand. And it's a bargain to boot. Five Stars!

J
Joshua

It's a simple stand that does what it should. Couldn't be happier.

T
Tony H
Great stand fits most of my razors

Fits my Razorock HD, UFO, and Super Knurl handles. Fits my Feather AS-D2 (there’s a bit of lean) as well as my Karve brass Overlander (with a bit of lean) and my Parker 24c. It fits my ‘59 Gillette Fatboy perfectly, like it was made for it. The only razor I own that won’t fit in it is my Merkur 34G (the gold plated version of the 34C).

I love the drainage hole in the bottom and will now put the handle of a 3-piece razor in it upside down to drain the water out of the handle after shaving. I’ve always worried about trapping water in the handle and corroding the inside but I’m sure if I leave a handle upside down in this stand for awhile, that will dry it out.

J
John
Mostly great

The stand had a nice heft to it, and fit the razorock UFO handle well. The bottom of the stand, however, is unfinished, and mine had a thin crack on the bottom. I was told by customer service that the bottom is unfinished on all stands to lower costs, so this should be expected. Overall, good value.

S
Sean
The best stand ever I have had

Great finishing, proper weight and positioning.

12